VPI Classic 1 Manuál s instrukcemi

The VPI Classic 1 Turntable Setup and Instruction Manual VPI Industries, Inc., 77 Cliffwood Ave. #3B, Cliffwood, NJ 07721 phone: 732-583-

9  Remember to always retighten those two setscrews when listening. If they are left loose the sound will be unfocused. H. VISCOUS D

10  The VPI Synchronous Drive System power supply provides a major increase in musicality by feeding the synchronous motor a perf

1 Important: Read Before Proceeding!  Read and follow the Safety Instructions below.  Save all packing materials. The Classic 1 should only be mo

2 Complete and return the warranty card. The warranty does not take effect until the warranty card is returned.  Remove and set aside the

3  Connect the supplied power cord to the Classic 1 in the fused rear socket.  Verify the turntable is level by using a 9- or 12-

4 THE COLOR CODE OF THE WIRE IS: RED = right hot BLACK OR WHITE = left hot GREEN = right groun

5  While the arm is in its rest, loosen the screws that hold the cartridge just enough that the cartridge can be moved back and forth.  Carefull

6 C. TRACKING FORCE AND AZIMUTH  Place the arm tube assembly on the lower bearing, taking care not to strain or damage the 4-color wir

7 to the grooves than running a cartridge at a heavy setting. Make sure the damping fluid is not installed when setting this force. VERY IM

8 D. ANTI-SKATING: REMEMBER: A 10.5” ARM NEEDS VERY LITTLE ANTI-SKATING FORCE  Anti-skating is one of the least understood forces acting on a t